Messages From 430440630640730

 


----------------------------

#61764 May 23, 2010

No, because the cool thing about the 43 is the hole in the side that

helps direct the cord that you're couching into the exact spot for your

needle to then catch it.

Glad you wrote to ask as it reminded me I needed to replace that photo

with the larger one. Thanks!

Kari~

Every morning in Africa, a Gazelle wakes up. It knows it must run faster

than the fastest lion or it will be killed. Every morning a Lion wakes

up. It knows it must outrun the slowest Gazelle or it will starve to

death. It doesn't matter whether you are a Lion or a Gazelle... when the

sun comes up, you'd better be running



----------------------------

#61769 May 23, 2010

thanks again for the info Kari, one more foot to add to my list..i suppose i should call them and order it before i drive out to pick up my bobbin case. when i do finally sit down and figure out how to use my cutwork software, i'd like to be fully.prepared.

.

SUSAN E.

Maryland

SUSAN ENTWISTLE IS THE QUIXOTICCRAFTER

You can find.QuixoticCrafter on:

Blogspot: ---Links-Are-Forbidden---

---------------



----------------------------

#61788 May 25, 2010

Hi

I have seen reference to a cutwork group and wonder if it is worth joining I have just bought a 730 with cutwork software but I had the wrong needle plate so the dealer is changing it but they are out of stock, I am not worried at the moment as I am busy with another machine ( can't mention which as not bernina) but would like to learn more about cutwork so I can be ready.

Thanks a lot

Karen

Sent from my iPod



----------------------------

#61806 May 25, 2010

Karen,

"bought a 730 with cutwork software" Unless things have changed recently you cannot use the cutwork tool with the Artista 730. Only CB machines and the 800 series can use this tool. I think a mistake has been made at your dealer. Robert







----------------------------

#61807 May 25, 2010

Really? I didn't realize that. I knew it was true of the felting tool.

Pam



Karen,

"bought a 730 with cutwork software" Unless things have changed recently you cannot use the cutwork tool with the Artista 730. Only CB machines and the 800 series can use this tool. I think a mistake has been made at your dealer. Robert



----------------------------

#61808 May 25, 2010

Pam



----------------------------

#61812 May 25, 2010

Ok, this is odd. I just watched the cutwork video and they are using my machine a 640. I was told by our dealer that I cannot use this tool because you must remove the shuttle. Is it just my dealer? Or did Bernina change their minds about using this with a rotary hook? Robert



----------------------------

#61816 May 26, 2010

I think they're getting the Felting Attachment mixed up with the CutWork

Tool.

Kari~

May the force be with you. -Yoda

In honor of Star Wars' 33rd anniversary



----------------------------

#61825 May 26, 2010

Hi

Now I am worried does anyone out there use the cutwork tool on a 730 I cannot try mine yet as I am still waiting for my stitch plate, the software is still sealed in the box so I would like to be sure before I open it. My dealer is very good but this tool has only been available in this country for a short time.

Thanks

Karen in uk

Sent from my iPod



----------------------------

#61826 May 26, 2010

Karen,

I did not understand the information the person gave about it not being used on the 730. I do know that on our Berninav6yahoo group, there are several ladies that use it. I would check with your dealer and Bernina site in UK but I think you are okay. I know for sure one lady on this list has the software etc and runs it on a 200E. jabner



----------------------------

#61828 May 26, 2010

Karen,

I just watched the video on the Bernina site and it is demonstrated on a 640 which is a lower model than the 730. jabner



----------------------------

#61852 May 26, 2010

Karen...you will be fine. The CutWork Tool definitely works on a 730. In

fact, while my 830 was in the shop I ended up purchasing the CW stitch

plate for my 730 so I could continue to play with the tool. There IS a

firmware update for the 200/730 that you may want to look into. It

brings the firmware to 5.00

Kari~

Duct tape is like the Force - it holds the Universe together.

The only difference is that "May the Force be with you" sounds much

better than

"May you be covered in Duct Tape"






S
e
n
i
o
r
T
u
b
e
.
o
r
g