#23529 Nov 2, 2000
At 23:32 01.11.00 -0000, firstname.lastname@example.org wrote: >Message: 24
> Date: Wed, 1 Nov 2000 14:02:24 -0800 (PST)
> From: Charles Linsley linsley@...>
>Subject: Re: Re: SPEED STEP MEMORY
>Col Andre Kritzinger wrote
>> Chuck Linsley wrote: "All that is really needed is a bigger capacitor
>> on the output of the decoder's rectifier bridge. [SNIP] >No, it would have to be soldered to the PCB, after the rectifier bridge,
>in parallel with the filter cap that is already there.
Would it be possible to keep only the voltage of the micro up, which would
reduce the size of the needed capacitor?
The flywheel could help the loco across bad spots and cares for smooth
The only problem I see is the need of a diode e.g. between voltage
regulator and the micro, needing quite some knowledge about the decoder